Your Source for products required

for Manufacturing (Cable)

Representing  manufacturers of ECCS Tapes, Copolymer coated

Aluminium Tapes, Tin Plates ; UV Inks   and more

 

 

Copolymer Coated
Steel Tapes
 

Tensile

Strength

Elongation

Thickness

Width

310~390MPa

≥15%

0.14 mm -0.15 mm
0.04 mm -0.05 mm

600mm~610mm

Specifications in detail
GS Strands     

Nominal Dia. Of Wire,mm

Number of wire

Breaking Load - KN

zinc coating (g/m)

Tensile strength (Mpa)

Galvanized steel strand

1.8

7

23.7

220

1370

Galvanized steel strand

2

7

25.8

230

1270

Galvanized steel strand

2.3

7

34

230

1270

Specifications in detail            Specifications in detail
.................
  • Copolymer Coated

    Aluminium Tape

     

     

     

     Copolymer Coated Aluminium Tape is used for the Optical-Fiber-Cableshield layers, moisture-proof layers and Armour layers
    It
    Consists of aluminium foil coated uniformly with copolymer film on both sides with perfect lamination and is used to seperate groups of conductors in
    telephone cable, preventing interference and cross-talk.

     

    Specifications in detail

  • Hot Dipped
    Galvanised Steel Strip/Coil

    .................

    Main specifications for GI strips:


    Thickness: 0.20mm-3.0mm
    Width: 20mm-680mm, 1000mm,1200mm,1250mm
    Zinc coating: Z06-Z27 (60grams/m2 - 275gram/m2)
    Surface: Normal spangle, Chromated, Oiled
    Coil weight: 200kgs to 5,000 kgs
    Inside Diameter: 200mmm, 450mm, 508mm, 610mm
    Material (normal): Yield strength 280-350 MPA; Tensile strength 380-450 MPA

    The Chemical composition    C – 0.085, Si – 0.20, Mn – 0.32, S – 0.021, P – 0.023

     

    Main applications:


    1. Pre-galvanized steel tubes, pre-galvanized steel pipes.
    2. Galvanized steel channels, Galvanized steel profiles.
    3. Armouring cable

    .................

    Specifications for the Tinplate


     

    Steel Type

     Q195     Q195L      08AL   SPHC   

    (According to Customer`s Require ) 

    Thickness

    0.15 -- 0.50 mm

    Tolerance

    0.01 mm

    Width

    260 ~ 795 mm

    Tolerance

    0.00 ~ + 2 mm 

    Tin Coating

     

    min 1.1 x 1.1 g/m       max 5.6 x5.6 g/m  (Equal / Differential coating to customer`s require)   

     

    Temper

     T 2.5 ~ T7 

    Anneal

    CA  BA

    .................
  •